SIMATIC DP, BASIC MOD. BM143 ET 200ECO: 8DI/8DO, 1.3A, 8 X M12, DOUBLE-ASSIG.,IP65/67, CONNECTION BLOCK 6ES7194-3AA00-0.A0 MUST BE ORDERED SEPARTELY MUST BE ORDERED SEPARTELY

SIMATIC DP, TB8 TERMINAL BLOCK (ET 200B) FOR ANALOG ELECTRONIC MODULES WITH 4-WIRE SPRING-LOADED TERMINAL; W=160MM

SIMATIC DP, ET 200M INTERFACE IM 153-4 PN IO FOR MAX. 12 S7-300 MODULES, EXTENDED FUNCTIONS: ISOCHRONEOUS REALTIME COMMUNICATION CLASS 1 AND 2, MODULE EXCHANGE W/O PG, OPERATION W/O MMC, MAINTENANCE NEW IO MODULES ARE SUPPORTED

SIMATIC DP, electronic module for ET 200L 32 DO, 24 V DC/0.5 A

SIMATIC DP, ELECTRONIC MODULE ET 200S: 2AI HIGH SPEED I-4WIRE 4 - 20MA; 16BIT, 15 MM WIDTH, FOR 4-WIRE TRANSDUCER, CYCLE TIME OF MODULE: 0.1MS, WITH LED SF (GROUP FAULT)

SIMATIC DP, Interface module IM 151-1 Standard for ET 200S; incl. termination module Data volume of 244 bytes each for inputs and outputs; max. 63 I/O modules PROFIBUS DP V0 and V1 up to 2 m width can be connected; Bus connection via 9-pin D-sub

SIMATIC DP, ELECTRON. MODULE F. ET200S, 4 F-DI/3 F-DO DC24V/2A PROFISAFE, 30 MM WIDTH UP TO CATEGORY 3 (EN954-1)/ SIL2 (IEC61508)/PLD (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF

SIMATIC ET 200SP, BUNDLE PROFINET IM, IM155-6PN ST, MAX. 32 PERIPHERY MODULES AND 16 ET 200AL MODULES, SINGLE HOT SWAP, BUNDLE CONTAINS: INTERFACEMODULE (6ES7155-6AU00-0BN0), SERVERMODULE (6ES7193-6PA00-0AA0), BUSADAPTER BA 2X RJ45 (6ES7193-6AR00-0AA0)

SIMATIC DP, INTERFACE MODULE IM152-1 FOR ET200ISP, FOR STANDARD AND REDUNDANT OPERATION

SIMATIC DP, INTERFACE MODULE IM151-1 FO FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128 BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES CONNECTABLE; BUS INTERFACING VIA INTEGR. FO INTERFACE INCL. TERMINATING MODULE

SIMATIC DP, INTERFACE DP/PA-LINK A. ET200M IM153-2 HF FOR EXPANDED TEMPERATURE RANGE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE

SIMATIC DP, Electronics module ET 200S 4AI standard I-2-wire, 4-20 mA; 13 bit, 15 mm width, for 2-wire transducer Cycle time 40 ms/module with SF LED (group fault)