12-Slot Universal Controller

Mounted rack case with 9 module slots.

Power Supply Module with nominal rated voltage of 120/240 VAC or 125 VDC and Input Voltage Rang from 85 to 264 VAC or 100 to 150 VDC, Input Power:437 W,Output Voltages:+ 5 VDC, +12 VDC or -12VDC.

Genius Bus Controller with single slot on a PLC backplane.No. of channels: 1 Devices: 32 at 153.6 Kbaud Serial Ports: 1 (Hand Held Monitor Port) Current Required: 1.3 Amps from Backplane

Power Supply Module with rated voltage of 120/240 VAC or 125 VDC, and Input Voltage Range of 85 to 264 VAC or 100 to 150 VDC, Input Power:125 W,Output Voltages:+ 5 VDC, +12 VDC or -12VDC.

Reflective Memory Module. The reflective memory capacity available goes up to 16 Megabytes and the maximum supported distance between nodes is up to 300 meters.

700 MHz Central Processing Unit with CPU Memory of 10 Mbytes,Serial Ports:3, Serial Protocols:Modbus RTU Slave, SNP, Serial I/O

16MB Redundancy Module with Reflective Memory of 128 MB, Optic Network Speed: 2.12 Gbaud, Transfer Rate: 2.1 GB/s, User memory: 16MB SDRAM, Operating voltage: +5VDC, Current requirements: 1.8A

CPU with 700 MHz Processing Speed and CPU Memory is 10 Mbytes, Floating Point: Yes, Serial Ports: 3, Serial Protocols: Modbus RTU Slave, SNP, Serial I/O, Embedded Comms: RS-232, RS-486. Ethernet interface.

600 MHz Central Processing Unit with memory of 64 Mbytes, Floating Point:Yes, Serial Ports:3,Serial Protocols:Modbus RTU Slave, SNP, Serial I/O,Embedded Comms: RS-232, RS-486. Ethernet interface.

300 MHz Central Processing Unit(CPU) comes with memory of 10 Mbytes, 3 Serial Ports, Modbus RTU Slave, SNP, Serial I/O, RS-232, RS-486 Embedded Comms.

600 MHz CPU with 64 Mbytes Memory.