Scalance X Accessories MEDIA Module MM992-4CU 4 X 1000MBIT/S RJ45-PORTS, ELECTRICAL WITHOUT SLEEVE

COMMUNICATION Processor CP 1623 PCI EXPRESS X1 (3.3V/12V) FOR CONNECTING with IND.ETHERNET(10/100/1000MBIT/S) with 2-PORT-SWITCH(RJ45) VIA HARDNET-IE S73 and S7-REDCONNECT SUPPORT FOR OPERATING System SEE Simatic NET SW ENABLED FOR Simatic NET CD V7.0 HF1 OR HIGHER

Active field distributor AFD4 for PROFIBUS PA for foundation Fieldbus H1, 4 short circuit-proof spur lines with bounce protection logic Automatic bus termination for line and ring topology for extended temperature range Degree of protection IP66

Scalance XB208 MANAGEABLE LAYER 2 IE-Switch 8X 10/100 MBITS/S RJ45 PORTS 1X CONSOLE PORT, DIAGNOSTICS LED REDUNDANT POWER SUPPLY TEMP. RANGE 0 UP TO +60 DGR C DIN-RAIL MOUNTING Default-Ethernet/IP

Scalance X Accessories MEDIA Module MM992-4SFP 4 X 100/1000MBIT/S FOR SFP PLUG TRANSCEIVER

Scalance M874-3 FOR WIRELESS IP-COMMUNICATION OF ETHERNET- BASED AUTOMATIION DEVICES VIA 3G-Mobile RADIO HSPA+, VPN, FIREWALL, NAT 2-PORT Switch 1X DIG. INPUT, 1X DIG. OUTPUT PLEASE NOTE NATIONAL APPROVALS!

COMMUNICATION Processor CP 5623 PCI EXPRESS X1 (3.3V) FOR CONNECTION TO PROFIBUS INCL.DP-BASE SW,NCM PC: DP-RAM INTERF.F.DP-MASTER INCL. PG- and FDL-PROTOCOL, SINGLE LICENSE F.1 INSTALLATION, R-SW, Class ASW + ELECTR. MAN. ON CD 2-LANGUAGE (GER,ENG) SUPPORT FOR OPERATING System SEE Simatic NET SW

SIPLUS NET CP342-5 PROFIBUS -25 +70 DEGREES C BASED ON 6GK7342-5DA03-0XE0 . COMMUNICATIONPROCESSOR CP342-5 FOR CONNECTING SIMATIC S7-300 TO PROFIBUS, DP, S5-COMPATIBLE-, PG/OP- AND S7-COMMUNICATION

KEY-PLUG XM400, REPLACEABLE MEDIUM FOR ACTIVATING OF LAYER 3 FEATURES FOR Scalance XM400 and FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE and FOR STORAGE OF CONFIGURATION DATA.

SCALANCE XB205-3LD managed layer 2 IE switch 5x 10/100 Mbit/s RJ45 ports 3x SM FO SC-port 1x console port, diagnostics LED redundant power supply; IEC 62443-4-2 certified; temperature range 0 °C to +60 °C; DIN-rail mounting; default EtherNet/IP.

Field Device Coupler FDC 157 physical interface for PROFIBUS PA or Foundation Fieldbus H1 integrated bus supply up to 1000 mA with redundancy capability integrated diagnostics Degree of protection IP20 for extended temperature range

Communications processor CP 5613 A3, PCI card (32-bit; 3.3/5 V; 33/66 MHz); with a Interface for connection to PROFIBUS; including configuration tool and DP-Base software: DP-RAM interface for DP master; including PG and FDL protocol; Single License for 1 installation of runtime software, Class A; Software+Manuals on DVD; 2 languages (de, en); Operating system support see SIMATIC NET software